How to scan products continously when using a bluetooth scanner?

• Related Articles

• Setting up a Eyoyo-023 bluetooth scanner to work with ScanEZ

  Below is a video showing the configuration of an Eyoyo-023 with an apple ios phone using HID mode See Manual here: Eyoyo-023 Bluetooth Barcode Scanner

• What is carriage return mode and how to set it up on your bluetooth scanner

  Most modern handheld and bluetooth scanners are able to perform a carriage return (CR) also known as line feed after successfully scanning a barcode. It means it adds a return or presses the enter key. See it in action on this youtube video ...

• Why did ScanEZ stop reciving the barcode I scanned from the bluetooth scanner?

  See the table below for possible causes of this issue Issue Solution Reference The input field Enter EAN/UPC to search has a blinking courser  Touch outside the input area to allow the app to accept the scanned barcode Check to see video Bluetooth ...

• Turn on or off the vibrate on successful scan mode?

  To turn on or off the feature which vibrates the mobile device when a barcode is successfully scanned follow the steps below 1. Go to the Product Research screen  2. Click on the three vertical lines on the top right-hand corner of the screen ...

• Does ScanEZ work with bluetooth scanners that support HID mode?

  Yes. ScanEZ supports HID bluetooth scanners ?️  HID mode is the scanner's factory mode and is intended to work with a wide variety of other devices. In this mode, the scanner mimics a Bluetooth keyboard and requires tapping or clicking a text field ...