Turn on or off the vibrate on successful scan mode?

• Related Articles

• How to scan products continously when using a bluetooth scanner?

  To scan products continuously, please make sure your Bluetooth scanner is in the carriage return mode (meaning it will automatically press enter after a scan). If you are unsure how to do this, please refer to this post. 1. Pair your Bluetooth ...

• Does ScanEZ work with bluetooth scanners that support HID mode?

  Yes. ScanEZ supports HID bluetooth scanners ?️  HID mode is the scanner's factory mode and is intended to work with a wide variety of other devices. In this mode, the scanner mimics a Bluetooth keyboard and requires tapping or clicking a text field ...

• What is carriage return mode and how to set it up on your bluetooth scanner

  Most modern handheld and bluetooth scanners are able to perform a carriage return (CR) also known as line feed after successfully scanning a barcode. It means it adds a return or presses the enter key. See it in action on this youtube video ...

• How enable the shake on scan feature on ScanEZ?

  To enable the shake on scan feature on ScanEZ follow these steps 1. Go to the Product Research screen.  2. Locate and click on the three vertical lines on the top left-hand corner to open the settings menu  3. Click on Device Settings 4. Click the ...

• What to do when my iOS device says 'Camera Not Authorized' when using the bar code scan feature

  When your iOS device says Camera Not Authorized this is caused because the proper permissions are not set on the iOS device to allow the app to use the camera when operating. Follow the steps below to fix this issue: 1. Go to the home screen, locate ...