What to do when my iOS device says 'Camera Not Authorized' when using the bar code scan feature
When your iOS device says Camera Not Authorized this is caused because the proper permissions are not set on the iOS device to allow the app to use the camera when operating. Follow the steps below to fix this issue:
1. Go to the home screen, locate and click on Settings
2. Scroll down to locate and click on Privacy
3. Scroll down to locate and click on Camera
4. Locate ScanEZ and click on the toggle to the right to give ScanEZ the permissions to use the camera
Related Articles
How enable the shake on scan feature on ScanEZ?
To enable the shake on scan feature on ScanEZ follow these steps 1. Go to the Product Research screen. 2. Locate and click on the three vertical lines on the top left-hand corner to open the settings menu 3. Click on Device Settings 4. Click the ...
How to scan products continously when using a bluetooth scanner?
To scan products continuously, please make sure your Bluetooth scanner is in the carriage return mode (meaning it will automatically press enter after a scan). If you are unsure how to do this, please refer to this post. 1. Pair your Bluetooth ...
Turn on or off the vibrate on successful scan mode?
To turn on or off the feature which vibrates the mobile device when a barcode is successfully scanned follow the steps below 1. Go to the Product Research screen 2. Click on the three vertical lines on the top right-hand corner of the screen ...
Using the data export settings feature on ScanEZ
You can specify the data points you want to export by using the export settings. Please watch the video below on how to accomplish this:
What is the minumum version of Android or iOS for ScanEZ?
For Android: We recommend that you run at least version 6.0 (codename Marshmallow) or above. For iOS: We recommend that you use an Apple iOS device running version 9.0 or higher to avoid compatibility issues.