Why did ScanEZ stop reciving the barcode I scanned from the bluetooth scanner?

See the table below for possible causes of this issue

Issue	Solution	Reference
The input field Enter EAN/UPC to search has a blinking courser	Touch outside the input area to allow the app to accept the scanned barcode	Check to see video
Bluetooth device is not properly sending the barcode to the phone	make sure the Bluetooth scanner is not set to store the scanned barcodes locally

Related Articles
How to scan products continously when using a bluetooth scanner?
To scan products continuously, please make sure your Bluetooth scanner is in the carriage return mode (meaning it will automatically press enter after a scan). If you are unsure how to do this, please refer to this post. 1. Pair your Bluetooth ...
Setting up a Eyoyo-023 bluetooth scanner to work with ScanEZ
Below is a video showing the configuration of an Eyoyo-023 with an apple ios phone using HID mode See Manual here: Eyoyo-023 Bluetooth Barcode Scanner
Does ScanEZ work with bluetooth scanners that support HID mode?
Yes. ScanEZ supports HID bluetooth scanners ?️ HID mode is the scanner's factory mode and is intended to work with a wide variety of other devices. In this mode, the scanner mimics a Bluetooth keyboard and requires tapping or clicking a text field ...
What is carriage return mode and how to set it up on your bluetooth scanner
Most modern handheld and bluetooth scanners are able to perform a carriage return (CR) also known as line feed after successfully scanning a barcode. It means it adds a return or presses the enter key. See it in action on this youtube video ...
What bluetooth scanners have been tested on ScanEZ
We have tested the following scanners on ScanEZ Brand Model Last tested Link to Buy Tera 1100 11/30/2020 https://www.amazon.com/dp/B07T82BGQY Eyoyo EY-016 12/02/2020 http://www.amazon.com/dp/B083FMHFBG Eyoyo EY-023 9/18/2021 ...

Related Articles